Intelligent blind control / MTSWIS-101-WL

Radio Switch Shutter Plus

Some great advantages for you:

  • Used to control the motor of blinds, shutters, awnings, etc.
  • Z-Wave compatible
  • Very suitable for retrofits
  • Controllable with myTEM touch add-on
  • Position calibration
  • Operation also via local buttons

SKU: 805708 Categories: , ,

The Radio Switch Shutter Plus is used to control a blind with and without moving slats, shutters, awnings etc.

The Radio Switch Shutter Plus is controllable via the Radio Server, via the switches/buttons connected to the inputs or via the optionally connectable Touch Add-On. Thus, shutters and blinds can be controlled both via Z-Wave or as before via conventional wall switches.

When used together with the myTEM Touch Add-On, the temperature and humidity sensor integrated in the Touch Add-On, as well as the lighting cannot be used.

Applications:

  • Switching electrically operated blinds or similar shading devices
  • Operating voltage: 110 – 230 V AC ± 10%, 50 – 60 Hz or 24 V DC
  • Inputs digital: 2x Digital In, (I1 – I2), 230 V AC or 24 V DC (according to operating voltage)
  • Outputs: 2x Digital Out (relay) 250V AC61 6A cos(φ) = 1, 30V DC 6A
  • Interfaces: Z-Wave wireless standard
  • Mounting: in flush-mounted or cavity wall box (wall, ceiling) ≥ Ø 60 mm, depth ≥ 60 mm
  • Switching off: end position detection of the blind by calibrating the position
  • Control: Z-Wave, two local buttons, 5 buttons when Touch Add-On Glossy is connected.
  • Operating temperature range: 0° C to +40° C, non-condensing
  • Dimensions (WxHxD): 44 × 41 × 19 mm